Tiller Attachments

Mantis Tiller Attachments

The versatile Mantis tiller expands beyond a mini tiller into a lawn care tool with the attachments shown below. These attachments fit the 7000-series Mantis tillers. Note: these attachments are NOT compatible with the 3000-series tiller/cultivators (3550 and 3558).

Mantis Attachments
Mantis tiller wheel set

Wheel Kit – 9222

Wheel Set attaches in minutes and gives you the option to roll or carry your Mantis Tiller wherever you need it. Wheels add stability when you use the Crevice Cleaner or Border Edger attachments.

Not compatible with tiller models 3550, 3558.

  • Rubber wheels
  • Six height positions

Mantis tiller crevice cleaner attachment

Crevice Cleaner – 8222

Remove weeds and grass from cracks and other hard to-reach places without chemicals. Great for maintaining driveways, stone patios, and sidewalks. Pair with the Wheel Kit (9222) for the easiest experience.

Compatible with 9″ tillers only. Not compatible with tiller models 7566-12-02 (XP Tiller), 3550, 3558.

  • Wire wheel with 38 tough steel bristle brushes
  • Brush width is 7/16″; sits in 1/2″ wide hub plate
  • 3/4″ wide balancing wheel
  • Includes fender and safety goggles

Mantis tiller border edger attachment

Border Edger – 3222

Beautify your property with sharp, clean edges along walkways, flower beds and bushes. 6″ wheel and hardened spring-steel lawn edging blade attaches to either axle in minutes for deep or shallow edging needs.

Compatible with 9″ tillers only. Not compatible with tiller models 7566-12-02 (XP Tiller), 3550, 3558.


Mantis tiller aerating attachment

Aerator – 4222

Cuts into the soil under your lawn with four sets of tempered steel “knives,” to permit easy absorption of water, oxygen and nutrients.

Compatible with 9″ tillers only. Not compatible with tiller models 7566-12-02 (XP Tiller), 3550, 3558.

  • Tines cut 4 hairline slits roughly 2.5 inches apart and 1.5 inches deep.
  • Perfect to use in compact, clay soil.

Mantis tiller aerating attachment for XP tiller

XP Aerator – 4265

Cuts into the soil under your lawn with four sets of tempered steel “knives,” to permit easy absorption of water, oxygen and nutrients. Includes Aerator tines set and 4 tine retaining pins.

Compatible with 16″ tillers (XP tillers) only.


Mantis tiller furrowing tines attachment

Planter/Furrower – 6222

The Planter/Furrower attachment is great for tilling in narrow areas and for creating raised beds. Put away the hand hoe and use the Mantis Planter/Furrower attachment instead!

Not compatible with tiller models 3550, 3558.


Mantis tiller plow attachment

Plow – 3333

Hardened steel plow blade forms straight, uniform deep or shallow furrows in tilled soil much faster and simply than doing it by hand. Plows a swath 18″ to 20″ wide. Attaches to front or rear of tiller. Plow blade adjusts to 5 positions.

Not compatible with tiller models 3550, 3558.


Mantis tiller Dethatcher attachment

Dethatcher – 5222

Dethatch your lawn regularly in spring and fall, especially before feeding and fertilizing. 60 spring-steel picks dethatch a 15″ swath of grass with a single pass. Includes two fender extensions that slide onto either side of the tiller fender.

Not compatible with tiller models 7566-12-02 (XP Tiller), 3550, 3558.


Mantis XP Tiller dethatcher attachment

XP Dethatcher – 5265SH

Dethatch your lawn regularly in spring and fall, especially before feeding and fertilizing. 60 spring-steel picks dethatch a 15″ swath of grass with a single pass.

Compatible with 16″ tillers (XP tillers) only.


Mantis 1722 Weed Reducers Attachment

Weed Reducers – 1722

Helps reduce the amount of stringy weeds and vines that may wrap around the tine shaft of the transmission. Easily install on the tine shaft of your Mantis tiller. Sold as a set.

Not compatible with tiller models 3550, 3558.


Tiller Kickstand – 4333

Kickstands are included as standard equipment on tiller models: 7924 and 7940, and does not need to be purchased separately.

This kickstand assembly fits tiller models: 7225, 7230, 7250, 7252, 7261, 7262, 7263, 7265, 7268, 7920, 7924, 7925, 7940


Tiller Kickstand – 4340

A kickstand is included as standard equipment on tiller models: 7566-12-02 and does not need to be purchased separately.

This kickstand assembly fits ONLY the XP and ‘deluxe’ tiller models : 7566-12-02, 7234, 7244, 7264, 7265, 7274, 7566, 7567, 7990, 7997